Ford AFE>
10-10063 aFe Stock OEM Replacement Filter - 1983-94


Price: $48.58
Prod. Code: 10-10063

10-10063 aFe Stock OEM Replacement Filter - 1983-94

Features

Benefits

Pliable progressive polyurethane seal
100% polyurethane construction
Deepest pleats in the industry
Minimal wicking
Factory pre-oiled with non-surfactant containing refined oil
Washable/reusable cotton gauze media
 

Tight seal without gaskets or sealants
Withstands extreme engine temperatures for extended-service live
Improved airflow, filtration, and dust-holding capacity
Larger filtration area for more airflow
Will not damage sensitive electronic sensors
The last filter you will buy for your vehicle

Round, Flat, Oval, Conical...aFe Makes Them All!

aFe's high performance, high flow OE air filter replaces the restrictive factory paper filters and lets your engine breathe better.  Paper filters do a good job in keeping dirt out but can clogged easily so that they need to be replaced frequently.  Foam filters also clog easily.  A washable/reusable, cotton gauze filter like ours allows more airflow and is washable and reusable.  Try a simple test.  Put a sheet of tissue paper up to your mouth and draw air through it.  Now put a sheet of cotton gauze and see the difference.  What happened to the tissue paper when you got it wet? What happened to the gauze?  Our filters are like that.

 

Paper filter element

Foam filter element

aFe cotton gauze filter element

 

With our filters, the engine can breathe a lot better.  Have you ever tried running when you had a cold?  It's hard when you can't breathe well, right?  Your car's engine is the same way.  With a restrictive paper filter, it has to struggle to run at its best.  When the filter is new and unclogged, it works fine but when dirty, the engine has to struggle.  A stock OE paper filter will quickly become clogged as it become dirty.

Our filters are built to let the engine breathe better even as the filter gets dirty.  The multiple layers of cotton gauze are sandwiched between two layers of epoxy coated aluminum screen and pleated like a lamp shade.  Have you ever looked at cotton gauze under a microscope?  It has tiny micro fibers branching out from the strands. When the gauze is oiled like our filters are, these strands attract dirt and dust particles.  One or two layers would allow dirt and dust particles to pass through, therefore we stack multiple layers with progressively tighter mesh to catch progressively smaller and smaller particles, as small as 2 microns in size.  The aluminum screen holds the layers in place and protects the cotton gauze.. 

 

 

 

We design our filters differently than other cotton gauze filters.  We design our filters to have the tallest pleats that the factory air box will let us.  There two reasons for this: 1) Taller pleats mean more filter material to hold the dirt and 2) Taller pleats mean that the pleats can be spaced out more to let more air through. 

 

 

 

We also have a different pleat geometry than others.  Take a look at ours.  See the rounded tips like a dolphin's nose.  Others are more triangular and pointed.  This rounded design allows the air to flow more efficiently around the tops of the pleats.  Not only that, because it is rounded, the pleats aren't tightly pinched and let air flow through the tops and bottom of the pleats.  These features allow our filters to breathe better. 

 

 

 

 

 

 

 

We use 100% engineering grade polyurethane which is more flexible and will seal better in today's plastic and fiberglass factory air boxes.  To make sure that our filters stand up over the life of your vehicle, we have urethane on all four sides of the filter, not just on the open ends.  The polyurethane stands up to high engine temperatures and engine chemicals better that the plastomers that the factory filters use. 

 

 

 

 

 

Another feature that makes our filters unique is our progressive bump seal on our flat filters.  This bump seal made of flexible polyurethane is compressed tightly in the factory air box for a sure leak proof seal even when the factory air box has uneven sealing surface. 

 

 

 

 

Some of our filters, especially for for diesel applications, have expanded metal screens for additional rigidity.  In a turbo diesel applications, the turbo will create a vacuum as it spools up and draws air into the engine.  If the air filter is clogged, it is possible for a paper filter to be sucked into the turbo.  Having a dirty filter sucked into the turbo is not very good for a diesel engine.  aFe embeds the expanded metal screen into the polyurethane for a secure lasting fit.

 

 

 

 

On our round or oval filters, we insure a tight seal against leakage by designing in small ridges that are compressed as the filter is placed on the stock inlet.  Being constructed of 100% polyurethane, the flanges and the ridges guarantee excellent fit no matter how often you wash and reuse our filters.

 

 

Dodge Cummins 12v  FASS - Fuel Air Separtion System. Made In America, Free Ground ShippingEdge LogoAdvance Flow Engineering, air filters and air intake systems, with Pro-Guard,DSS-Dodge Steering StabliizersPacbrake Exhaust BrakeAutometer Gauges and Gauge HoldersIsspro Gauges
MBRP aluminized and stainless steel exhaust systems and tipsATS 3 piece pulse manifold for Dodge 12v, 24v and 2 piece pulse manifold for Commom Rail Cummins Engines CFM+ Intake Manifold- The Ultimate Intake ManifoldARP Head Studs for Dodge, Ford,
Colt Cam MADS Smarty Cr, Jr., Power on Demand Power Module, Dodge Cummins  
Diablosport Predator Flash Tuner

we gladly accept VISA/MasterCardPaypal logo
Open Monday to Friday 8am to 5 pm West Coast Time

All prices quoted are in US dollars
We ship from the  USA and from Canada to provide you with the best shipping rates possible
all invoicing is done in the customer's home currency 
1-877-858-7325

PEAK DIESEL PERFORMANCE INC
3381 208th STREET
LANGLEY, B.C
V2Z 2C5