51-10782 Stage 2 Cold Air Intake System Type Cx with Pro-Dry S GM Trucks (01-04) V8-6.6L LB7 (td)
Description
Oil-free 2-layer synthetic media
Increased air flow upto 50% for better performance
Increases horsepower & torque
Improces Fuel economy
99.4% efficient** for excellent protection
Wire mesh for structural integrity & quality
Convenient quick & easy cleaning
advanced FLOW engineering offers you a better choice of oil-free filters: New Pro Dry S synthetic dry-media filters. Pro Dry S filters use a revolutionary two-ply synthetic material that is functionally superior to traditional paper media and single-ply synthetic, and easy to service. Pro Dry S dry-media filters increase airflow providing improved horsepower, torque, and fuel economy with 99.4%* filtration efficiency. Perhaps the greatest benefit of new Pro Dry S filters is the convenience of servicing these oil-free filters. To clean a Pro Dry S filter lightly tap it on the ground, vacuum it, or wash with soap and water. Solvents and oiling are not necessary. Pro Dry S dry-media filters by aFe are now available on all of our popular air intake systems for gas and diesel trucks, SUVs, and cars. Replacement Pro Dry S filters for all air intake systems are also available and sold individually.
2-LAYER SYNTHETIC CONSTRUCTION
1. Outer screen provides strength and prevents damage to
filter media.
2. Thick layer slows air velocity so dust particles fall out of suspension and become trapped in fabric fibers.
3. High efficiency thin layer traps remaining dust particles without slowing airflow.
4. Inner screen provides support and quality without the need for additional internal structures.
Up to 50% airflow increase over stock.
99.4% dust filtration efficiency** for engine protection.
Pro Dry-S intake kits provide significant horsepower gains.
Significantly improve engine performance and fuel economy
Increase low-end torque and towing power.
Enhanced acceleration for greater passing ability.
*2003-'05 DOdge Ram V8-5.7L Hemi Pro Dry-S stage 2 intake vs. OEM intake.
**Cumulative efficiency test per SAE J726 - Coarse Dust test procedure using 21-40035 air filter.
FOR MAXIMUM AIRFLOW AND DUST-HOLDING CAPACITY
Our revolutionary new dry synthetic media is easy to clean, and offers three cleaning options:
Tap Clean: You can tap your Pro Dry S filter and return it to 85% of its original airflow. Simply remove the filter from the intake kit and lightly tap it on a solid surface. Tap and turn the top and bottom of the filter until most of the visible dirt has been released. Reinstall the filter in your vehicle. Do not apply oil to the filter.
Vacuum clean: You can vacuum your Pro Dry S filter and return it to 96% of its original airflow. Remove the filter from the intake kit and vacuum away the dirt using a shop vacuum or regular house vacuum. Reinstall the filter in your vehicle. Do not apply oil to the filter.
Wash clean: You can wash your Pro Dry S filter and return it to 100% of its original airflow. Remove the filter from the intake kit. Run the filter under running water from the inside out. Turn the filter to remove all visible and hidden dirt. If your filter is coated with grease or road grime, it may be necessary to use soap and water to get it fully clean. You can completely submerge the filter in a mixture of warm water and mild detergent (use a common household detergent such as dish or liquid laundry soap) if needed. Rinse clean. Allow the filter to dry completely (our synthetic media dries quickly and should dry within a few hours in normal conditions). Reinstall the filter in your vehicle. Do not apply oil to the filter.
Open Monday to Friday 8am to 5 pm West Coast Time
All prices quoted are in US dollars
We ship from the USA and from Canada to provide you with the best shipping rates possible
all invoicing is done in the customer's home currency
1-877-858-7325
Tap Clean: You can tap your Pro Dry S filter and return it to 85% of its original airflow. Simply remove the filter from the intake kit and lightly tap it on a solid surface. Tap and turn the top and bottom of the filter until most of the visible dirt has been released. Reinstall the filter in your vehicle. Do not apply oil to the filter.
Vacuum clean: You can vacuum your Pro Dry S filter and return it to 96% of its original airflow. Remove the filter from the intake kit and vacuum away the dirt using a shop vacuum or regular house vacuum. Reinstall the filter in your vehicle. Do not apply oil to the filter.
Wash clean: You can wash your Pro Dry S filter and return it to 100% of its original airflow. Remove the filter from the intake kit. Run the filter under running water from the inside out. Turn the filter to remove all visible and hidden dirt. If your filter is coated with grease or road grime, it may be necessary to use soap and water to get it fully clean. You can completely submerge the filter in a mixture of warm water and mild detergent (use a common household detergent such as dish or liquid laundry soap) if needed. Rinse clean. Allow the filter to dry completely (our synthetic media dries quickly and should dry within a few hours in normal conditions). Reinstall the filter in your vehicle. Do not apply oil to the filter.
