Tapered molded tube smoothly transitions from massive air filter to turbo housing
New MAF senor pad tuned exclusively for the LMM
70% CFM Increase over Stock Intake Measured @1.5"H2O
Enclosed in a durable 16 gauge, powder-coated heat shield; this air intake system features a washable/reusable conic al air filter that improves airflow for increased horsepower and torque. This intake system also features a heat-insulating molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. One-piece heat shield requires little or no assembly and the filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.
Replacement Filters:
21-90038
24-91035
75-90038
advanced FLOW engineering offers you a better choice of oil-free filters: New Pro Dry S synthetic dry-media filters. Pro Dry S filters use a revolutionary two-ply synthetic material that is functionally superior to traditional paper media and single-ply synthetic, and easy to service. Pro Dry S dry-media filters increase airflow providing improved horsepower, torque, and fuel economy with 99.4%* filtration efficiency. Perhaps the greatest benefit of new Pro Dry S filters is the convenience of servicing these oil-free filters. To clean a Pro Dry S filter lightly tap it on the ground, vacuum it, or wash with soap and water. Solvents and oiling are not necessary. Pro Dry S dry-media filters by aFe are now available on all of our popular air intake systems for gas and diesel trucks, SUVs, and cars. Replacement Pro Dry S filters for all air intake systems are also available and sold individually.
Our revolutionary new dry synthetic media is easy to clean, and offers three cleaning options:
Tap Clean: You can tap your Pro Dry S filter and return it to 85% of its original airflow. Simply remove the filter from the intake kit and lightly tap it on a solid surface. Tap and turn the top and bottom of the filter until most of the visible dirt has been released. Reinstall the filter in your vehicle. Do not apply oil to the filter.
Vacuum clean: You can vacuum your Pro Dry S filter and return it to 96% of its original airflow. Remove the filter from the intake kit and vacuum away the dirt using a shop vacuum or regular house vacuum. Reinstall the filter in your vehicle. Do not apply oil to the filter.
h clean: You can wash your Pro Dry S filter and return it to 100% of its original airflow. Remove the filter from the intake kit. Run the filter under running water from the inside out. Turn the filter to remove all visible and hidden dirt. If your filter is coated with grease or road grime, it may be necessary to use soap and water to get it fully clean. You can completely submerge the filter in a mixture of warm water and mild detergent (use a common household detergent such as dish or liquid laundry soap) if needed. Rinse clean. Allow the filter to dry completely (our synthetic media dries quickly and should dry within a few hours in normal conditions). Reinstall the filter in your vehicle. Do not apply oil to the filter.
