|
BREAK IN PROCEDURE
- Cam Lube on all lobes, lifter faces, distributor gears and oil pump gears.
- Oil all bearing journals and lifter barrels.
- Always turn engine over by hand before starting, check for clearances and proper timing location.
- Fire up to 1800 – 2000 rpm. for 18 – 20 minutes.
Note: Most oil companies have taken out a percentage of additives that are meant for anti-scuffing for break in on flat tappet cams. Always add a bottle of EOS (Engine Oil Supplement) to your oil before fire up on new engines.
|
