View Product Images

Price: $375.00 Sale Price: No Price Prod. Code: Stage 3

H.D. "Big Stick" best all round power camshaft- $400.00 Core Charge does apply.  Also required with this Cam are new or reground lifters

		Duration		Cam	Lobe	Description
Prof. I.D.#		@ .050	ADV.	Lift	Sep
	INT.	159°		0.235	102	Stock 2nd Generation 12V 1994-1998.5
	EXH.	204°		0.263

Follow Cummins installation instructions, use adequate amounts of assembly lube and add GM EOS or Kirban performance ZDDP plus to ensure no break-in damage due to the new low zinc oils on the market.

BREAK IN PROCEDURE
Cam Lube on all lobes, lifter faces, distributor gears and oil pump gears.
Oil all bearing journals and lifter barrels.
Always turn engine over by hand before starting, check for clearances and proper timing location.
Fire up to 1800 – 2000 rpm. for 18 – 20 minutes.
Note: Most oil companies have taken out a percentage of additives that are meant for anti-scuffing for break in on flat tappet cams.
Always add a bottle of EOS (Engine Oil Supplement) to your oil before fire up on new engines.

You might also like...

Intercooler Boot & Clamp... Orig: $210.00 Sale: $195.00 Add to cart

Cummins Breather Kit 1988... $199.00 Add to cart

Lifter Set - Reground Ta... $102.00 Add to cart