SOLID STEEL ADJUSTABLE TRACK BAR
1994-2002 3rd Gen Style Dodge 4×4 Diesel 2500-3500
1994-2001 Dodge Ram 1500 – GAS
The Adjustable Track Bar will work on 1994-2002 trucks with lifts up to 3 inches.
A TBK Trackbar Conversion Kit is required to put this piece on. Please indicate when checking out whether or not you already have this piece.
Adjustable Track Bar and the new Track Bar Conversion Kit (sold separately) eliminates the troublesome ball joint on the OEM track bar on 1994 to 2002 Dodge 4×4’s.
Solid Steel Industries LTD. in conjunction with a chemist and a rubber bushing manufacturer, has designed a high-quality rubber bushing that is better than the OEM bushings on the 2003 and up Track Bars.
Using high-quality rubber bushings provides smooth quiet operation, with little or no vibration sent back to the steering wheel or elsewhere on the truck. The hardness of the rubber bushing eliminates the spongy feeling found in other, softer, rubber bushings, while still providing the right amount of deflection to reduce wear and hammering
These bushings do not hammer and wear out like steel rod ends, Heim joints, and urethane bushings.
This Adjustable Track Bar is fully adjustable from stock length to 4 inches longer, and it can be adjusted right on the truck to ease the process of centering the axle exactly. Just install the bar and turn the adjusting sleeve till the axle is centered, it’s that simple.
SSI is the ORIGINAL designer/manufacturer of this product.
Turnbuckle & Jam Nut wrench sizes – Jam Nut = 1″ 7/8″, Turnbuckle = 1″ 11/16″ The Adjustable Track Bar will work on trucks with lifts up to 3 inches.
Note: As there are many different models of suspension lifts and methods of lifting the trucks, some lifts provide Track Bar relocation bracketry, some don’t, as long as the mounting location of our TBK does not interfere with existing lift brackets, it will work.
NOTE: If you’re running the Borgeson box and are planning on converting to the 03 Style Trackbar with the SSI Trackbar Conversion Kit you will need an additional length bolt for proper installation.
** Solid Steel products are sold in BLACK ONLY. Parts are in red for photograph purposes only **
- Made in the USA.
- Straight bolt-on installation on most trucks.
- All mounting hardware is supplied.
- Dura-Coat finish on Track Bar.
- Does not interfere with the popular “Mag-Hytec” differential cover.
- No vibration, smooth feel.
- Works with lifts to 3 inches.
- High-quality graphite impregnated polyurethane bushings.