Product Description
South Bend Feramic Replacement Clutch
****SPECIAL ORDER, CALL FOR ETA****
Application:
1988-1993 Dodge Getrag 5 Speed
1994-2003 NV4500 5 Speed
1999-2000.5 NV5600 235HP Non HO Engine
550HP, 1100 torque Does not fit Dodge (OEM) stock flywheel. This clutch replaces South Bend Clutch 13125-FEK
Replacement Clutch
This Dyna Max kit features a performance organic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disk failure due to high horsepower and heavy hauling in the 5 speed and early 6-speed NON-High Output 12 1/4″ clutches. We have taken the 13″ High Output clutch and modified it to accept the 1 1/4″ input shaft. By doing this, it enabled us to offer a disk center that is 2-3 times larger and stronger than can be provided in the 12 1/4″ clutch kits. Rated to handle up to 550 horsepower & 1100 ft. lbs. of torque.
NOTE: It’s very important to Break-In your clutch with 500 miles of stop and go driving before you pull a load. Your clutch will last longer if you avoid downshifting whenever possible. Down-shifting flexes the pressure plate, causing uneven wear. Just remember, Use your breaks instead–they’re a lot less expensive to replace!
Reviews
There are no reviews yet.